Overview
Farrow & Ball Exterior Eggshell is a versatile exterior water-based paint for wood and metal finish. The resin-rich formula provides a flexible finish that moves with the painted surface to avoid flaking, peeling and fading for up to 6 years*. It also contains preservatives, which help to avoid algae and fungi growth. With a 20% sheen, this durable satin finish offers long-lasting colour and protection to almost anything in your outdoor space, from wooden window frames to railings. Thanks to its water-based formula, Exterior Eggshell is quick-drying, low-odour, low VOC and toy safe, a better choice for you and the planet.
- Satin finish: 20% sheen
- Exterior Eggshell is Farrow & Ball lowest sheen for exterior paint
- Offers a flexible & breathable finish
- Protects exterior wood & metal through changing weather
- Long-lasting colour - up to 6 years*
- Low odour & Low VOC
*when applied in accordance with F&B Product Advice Sheets
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Farrow & Ball tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Exterior |
| Recommended Use |
Almost anything in your outdoor space, from wooden window frames and cladding to metal guttering and railings. Not suitable for use on plastic. Not suitable for exterior decking or other pressure treated wood. |
| Base | Water-Based |
| Coverage | Up to 13m2 per litre |
| Drying Time | 2 hours |
| Re-Coat Time | 4 hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush, Roller or Sprayer |
| VOC Levels | Low |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Preparation
Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination.
Knotty or Resinous Wood Preparation:
- Heat the knot to draw out any excess resin (we recommend using a hot air paint stripper).
- Scrape off any residue resin, and then thoroughly clean the area with white or methylated spirit. Allow the area to dry thoroughly before continuing.
Exterior Bare Wood Surface Preparation:
- Fill any cracks, holes and open joints with an appropriate filler.
- To improve the paint's adhesion, lightly sand the surface.
- In environments where wood rotting fungi is likely to occur, treat with exterior wood preservative prior to priming.
- Prepare any knotty or resinous areas as above and patch prime with .
- Apply one coat of , in the correct colour tone for your top coat, and allow a minimum of 4 hours drying time.
- Apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.
Please note: Not suitable for exterior decking or other pressure treated wood.
Exterior Previously Painted Wood Surface Preparation:
- Remove any areas of old paint which are peeling or blistering as flaking or peeling can occur if you paint over weak paint layers. Blend and 'feather' the edges of areas of old paint, as this helps to smooth out the surface.
- Fill any cracks, holes and open joints with a water-based exterior wood filler.
- Lightly sand the surface to improve paint adhesion.
- In environments where wood rotting fungi is likely to occur, treat with exterior wood preservative prior to priming.
- Prepare any knotty or resinous areas as above and patch prime with .
- Apply one coat of , in the correct colour tone for your top coat (and allowing a minimum of 4 hours drying time between coats).
- Then apply two coats of your chosen Farrow & Ball finish, allowing the correct drying time between coats.
Please note: Repeatedly repairing cracks, holes and open joints in a surface may indicate that the surface is nearing the end of its life and will require additional effort to maintain it. If this is the case consider renewal or replacement.
Find out more information about the preparation of metal surfaces and more on the "Product Advice Sheet" in the "Datasheet" section.
Application
Always test a small area of the surface to be painted to ensure you are happy with the finished results
- Stir thoroughly before use.
- Ensure all surfaces are sound, clean, dry and free from dirt, grease and other contamination. Please note that flaking or peeling may occur if you paint over weak paint layers - to avoid this sand back any previous weak paint layers before you start painting.
- Where required apply suitable Farrow & Ball Primer & Undercoat to improve paint adhesion and promote depth of colour.
- For most applications, a quality fine-tipped synthetic bristled paint brush or medium pile woven polyester roller is recommended.
Find out more information about the Application on the "Product Advice Sheet" in the "Datasheet" section.
Always follow manufacturer's instructions found on the tin
For the very best results, Farrow & Ball always recommend using a Farrow & Ball Primer & Undercoat.
Recommended Primer & Undercoats:
- For use on wood:
- For use on metal:
- For use on interior walls & ceilings:
- For use to patch prime unsound masonry surfaces : Farrow & Ball Masonry & Plaster Stabilising Primer
Aftercare & Storage
Protect from frost and extreme temperatures.
It is recommended to use this product within 6 months of purchase therefore, we are unable to accept responsibility for the deterioration of contents or packaging after this date.
Wipe gently with a soft damp cloth or sponge. Some cleaning solutions may mark the surface. Test on an inconspicuous area before use. Do not use bleach-based cleaning products. As is standard for all decorative paints, we recommend that you leave a period of 2 weeks for the paint to fully harden or 'cure'. During this time, it is a good idea to treat the area with care and avoid using harsh cleaning.
Find out more information on the "Product Advice Sheet" in the "Datasheet" section.
